Step 1 – Choose your day

It is very important that you choose a fine, dry day as the emulsion needs to dry and allow the water to evaporate.  Also you don’t want rain washing away your topseal.

Step 2 – Checklist

Step 3 – Preparation

Wash & Clean the asphalt of any debris and remove any looses pieces. Make sure the topseal has been well mixed.  Recommend using a drill mixer attachment.  Also if there are any larger cracks(3 to 10mm) – It is best to fill them with Bitumend crackfix first.

Step 4 – Pour & Spread

Before spreading the Topseal, Recommend cutting in the edges with a paint brush.  Then pour the Topseal onto the asphalt and spread evenly using either a slurry broom or Squeegee.

Step 4 – Dry

Allow to dry – Leave for around 24 hours before walking or driving on the asphalt.